Veo Pan and Tilt Manual de usuario descargar pdf (Pagina 31)

MODIFYING RECORDING SCHEDULES

By default, the Veo 120XXN is set up for continuous recording, which means it is recording 24/7. You can set

up a schedule to record video only at certain times or to record video in response to motion or alarms.

SETTING UP TIMER/MOTION-BASED RECORDING AND PARAMETERS

1. Press SETUP, login as administrator and select Record Menu from the Main Menu

2. Select the Recording Operations sub-menu and set the schedule mode to either Daily or Weekly. The

selection in this menu will affect the Schedule section of the Timer/Motion and Alarm Setup sub-

menus.

Daily: Same recording schedule for each day of the week

Weekly: Different recording schedule can be setup for each day of the week

Also, set the pre-event recording time (0-5 seconds), and the post-event recording time (5, 10, 15,

20, 30, 60, 120, 180 seconds).

3. Press RETURN to go back to the sub-menu navigation. Select the Timer/Motion Setup and enter

PARAMETER tab to start configuring the motion-based Schedules.

i. Select the top row by moving the yellow box to this row using ARROW buttons, and press ENTER.

The yellow box will turn to a green cursor box.

ii. The table will be displayed with the current recording size, fps and quality for the time of day where

the green box is currently positioned (there are 24 cells to represent each hour of the day).

You can move this green box along the row.

iii. To apply the setting to the whole day, move the green box to the first cell of the row,

and press ENTER. You will see the box turn to a blue bordered box. Move the box across the

whole row, and it will highlight all the cells, and then press ENTER.

iv. A configuration window will pop-up on the screen (Figure. 55). You can change the resolution of the

cameras, change the frames-per-second rate, the quality and/or enable the Audio for the cameras.

Press OK when you’re finished to close the window and return to the menu. Press RETURN until you

exit to the Timer/Motion Setup sub-menu.

Use the USB mouse with the supporting

Veo 120XXN models for much simpler

navigation and setup.

TIP

Figure 53. Timer/Motion Recording Menu

Figure 54 Recording Parameters Setup

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 41 42

Sin comentarios

Veo Pan and Tilt Manual de usuario Pagina 31