Veo Pan and Tilt Manual de usuario descargar pdf (Pagina 9)

No. Function

1. USB port: USB port for the USB flash memory device and USB HDD backup.

On Veo 12008N/12016N models, USB port is also used to connect the USB mouse.

2. Rewind: Plays the video in reserve at a fast speed. In the PTZ/FOCUS control mode, this

button allows user to zoom out.

3. Reverse playback: Plays the video in reverse with normal speed or navigates the system

menus (left).

4. Increase playback speed: Increases the playback speed (forward or reverse) or navigates

the system menus (up).

5. Play forward: Plays the video forward with normal speed or navigates the system menus

(right).

6. Fast forward: Plays the video forward at a fast speed. In the PTZ/FOCUS control mode,

this button allows user to zoom in.

7. Channel selection buttons: Selects the available channels or allows entering the user

password. The number of channel selection buttons will vary based on Veo model.

LED Indicators: Indicates present system status:

PWR: Power – system on/off,

REC: Record – video recording on/off,

NET: Network – when remote clients are connected to the system this LED is lit green.

ALM: Alarm – alarm sensor on/off

8. JOG HOLD: Jog Shuttle hold. Adjust the playback speed with Jog Shuttle, then press

HOLD button to hold the current speed.

9. RETURN: Returns to the previous menu or cancels action.

10. PAUSE: Freezes the video recording playback and displays the current video frame.

11. Decrease playback speed: Decreases the playback speed (forward or reverse) or navigates

the system menus (down).

12. ENTER: Enters the menu/submenu or confirms action.

13. SCREEN MODE/DISPLAY: Selects screen mode between split screen division or full screen

modes. Depending on a Veo model, the following split screen divisions will be available: full

screen, 4-, 6-, 8-, 9-, 13-, or 16 split screen division.

14. SEARCH: Displays the search mode for video data searching.

15. MENU/SETUP: Displays the system menu.

16. PTZ/FOCUS: Displays the camera PTZ/FOCUS control mode.

17. JOG SHUTTLE: Controls the playback (forward or reverse) speed. Turn the dial clockwise

to increase the forward playback speed, turn the dial counter clockwise to increase the

reverse playback speed. The following playback speeds are available: x1, x2, x,4, x8, x16,

x32, and x64.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 41 42

Sin comentarios

Veo Pan and Tilt Manual de usuario Pagina 9